Product Range
-
LM Series
-
ADC Series
-
ALSI Series
-
AC4 Series
Alloys manufactured as per customer specifications
| Material | Grade | Si | Fe | Cu | Mn | Mg | Zn | Ni | Ti | Pb | Sn | Cr |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A380 | Max | 9.50 | 1.30 | 4.00 | 0.50 | 0.10 | 3.00 | 0.50 | - | - | 0.35 | - |
| Min | 7.50 | - | 3.00 | - | - | - | - | - | - | - | - | |
| AC4A | Max | 11.00 | 0.55 | 0.25 | 0.60 | 0.60 | 0.25 | 0.10 | 0.20 | 0.10 | 0.05 | 0.05 |
| Min | 8.00 | . | 0.30 | 0.30 | - | - | - | - | - | - | ||
| AC4B | Max | 9.00 | 0.40 | 4.00 | 0.50 | 0.40 | 0.50 | 0.35 | 0.20 | 0.10 | 0.05 | 0.05 |
| Min | 8.00 | 2.50 | 0.20 | 0.20 | - | - | - | - | - | - | ||
| ADC10 | Max | 9.50 | 1.30 | 4.00 | 0.50 | 0.30 | 1.00 | 0.50 | 0.20 | 0.20 | 0.20 | 0.20 |
| Min | 7.50 | - | 3.00 | 0.20 | - | 0.50 | - | - | - | - | - | |
| ADC12 | Max | 12.00 | 1.30 | 3.50 | 0.50 | 0.30 | 1.00 | 0.50 | - | - | 0.20 | - |
| Min | 9.60 | 1.50 | - | - | - | - | - | - | - | - | ||
| ADC6 | Max | 1.00 | 0.80 | 0.10 | 0.60 | 4.00 | 0.40 | 0.10 | - | - | 0.10 | - |
| Min | - | - | - | 0.40 | 2.50 | - | - | - | - | - | - | |
| ADC8 | Max | 7.00 | 1.30 | 5.00 | 0.60 | 0.30 | 2.00 | 0.30 | 0.20 | 0.20 | 0.10 | - |
| Min | 5.00 | - | 3.00 | 0.20 | . | - | - | - | - | - | - | |
| AL Si 12 Fe | Max | 13.50 | 0.90 | 0.08 | 0.55 | 0.10 | 0.15 | 0.10 | 0.15 | 0.10 | 0.05 | 0.05 |
| Min | 10.50 | 0.45 | - | - | - | - | - | - | - | - | - | |
| AL Si12 Cu | Max | 13.50 | 0.80 | 1.00 | 0.55 | 0.35 | 0.55 | 0.30 | 0.15 | 0.20 | 0.10 | 0.10 |
| Min | 10.50 | - | 0.05 | - | - | - | - | - | - | - | ||
| AL Si 12 CulFe | Max | 13.60 | 1.30 | 1.20 | 0.55 | 0.35 | 0.55 | 0.30 | 0.20 | 0.20 | 0.10 | 0.10 |
| Min | 10.50 | 0.70 | - | - | - | - | - | - | - | - | ||
| LM6 | Max | 13.00 | 0.60 | 0.10 | 0.50 | 0.10 | 0.10 | 0.10 | 0.20 | 0.10 | 0.05 | . |
| Min | 10.00 | - | - | - | - | - | - | - | - | - | ||
| LM13 | Max | 13.00 | 0.80 | 1.30 | 0.10 | 1.30 | 0.10 | 2.50 | 0.20 | - | . | 0.05 |
| Min | 11.00 | 0.80 | - | 0.70 | - | 1.00 | - | - | - | - | ||
| LM16 | Max | 5.50 | 0.60 | 1.50 | 0.50 | 0.60 | 0.10 | 0.25 | 0.02 | 0.10 | 0.05 | 0.05 |
| Min | 4.50 | - | 1.00 | - | 0.40 | - | - | - | - | - | - | |
| LM2 | Max | 11.50 | 1.00 | 2.50 | 0.50 | 0.30 | 2.00 | 0.50 | 0.20 | 0.30 | 0.20 | - |
| Min | 9.00 | - | 0.70 | - | - | - | - | - | - | - | - | |
| LM24 | Max | 9.50 | 1.30 | 4.00 | 0.50 | 0.30 | 3.00 | 0.50 | 0.20 | 0.30 | 0.20 | 0.05 |
| Min | 7.50 | - | 3.00 | - | - | . | . | - | - | - | - | |
| LM25 | Max | 7.50 | 0.50 | 0.20 | 0.30 | 0.60 | 0.10 | 0.10 | 0.20 | 0.10 | 0.05 | - |
| Min | 6.50 | - | - | 0.20 | - | - | - | - | - | - |
